Roof Tile Forming Machine

1. Manual uncoiler, no power (3T) 2. Feed guide

Concealed roof panel

1. Manual uncoiler, no power (5T) 2. Feed guide

Buckle roof panel

1. Main motor power: 7.5kW 2. Hydraulic motor power: 2.2kW 3. Number of molding lanes: 18 4. Uncoiling: 600mm 5. Thickness: 0.4-0.6mm 6. Tool material: Cr12

Arc forming machine

1) Machine dimensions (length × width):12000x800 2) Line speed: 12 m/min 3) Uncoiler: 5T 4) Number of molding lanes: 28 5) roll material using high quality alloy 45 steel 6) coil thickness: 0.4 mm-0.8mm 7) Motor power: 7.5kW

CZ section steel

Features of CZ section steel of WEIHUA Machinery Company: 1) Servo main drive 2) Quick exchange of C and Z, the conversion time is 10 minutes, when the width changes, the feeding frame can change at the same time 3) The width and height of the section can be steplessly adjustable 4) The cutting structure after punching is adopted, 5) The waist height on both sides is controlled by servo motors, and the width is directly set on the program, the operation is very convenient 6) The profile width servo motor is controlled, and the width is directly set on the program. The operation is very convenient. WEIHUA Company adopts the perfect combination structure of servo motor main drive and four guide pillar type side punching. These two structures are not available in the market at present. Such combination avoids all the above problems and makes CZ assembly more perfect, high speed, high precision, and is the machine with the highest cost-effective competitive advantage, (Up to 30 meters per minute without punching) High precision, within plus or minus 1mm.

C- type purlin machine

Description By changing the blade, one machine can produce four C- shaped purlins. Features: 1) The machine base is processed by the gantry machining center, and the screw positioning pin is connected to the machine base. Sheet metal forming straight, high precision. 2) Hydraulic cutting is adopted to ensure the accurate geometric contour of the forming plate. This cutting method does not produce waste. 3) The length is measured by computer. Oval holes shall be punched on both sides of C purlin with adjustable hole spacing. The support hole is punched in the middle of the purlin.

Z-type purlin machine

Description This machine adopts PLC automatic control, full hydraulic transmission, driving hydraulic cylinder to transport and shear to the hole through the central pumping station, and hydraulic motor as the main drive. It is characterized by hydraulic stability, high precision, high output, low energy consumption, and regular cut section geometry. Hydraulic drive, two sets of correction with, globe valve with national patent.

3 3 non-continuous polyurethane laminating machine

The laminated mold greatly reduces the labor intensity of workers, saves labor time and improves production efficiency. The equipment occupies a reduced area and reduces capital investment. This equipment adopts contact heater, which can set the preheating time and automatically disconnect the power supply during the operation of workers, which is safe and reliable. This equipment adopts the left and right rotation pressing, the left mold in the pressing process, the workers operate the right mold, when the right mold for pressing, assembling the left mold, a cycle of time greatly improve the work efficiency. The hydraulic system of this equipment is self-starting and self-rest, which can save energy consumption better. Equipped with 7-inch touch screen, man-machine interface, simple operation.

Non-continuous polyurethane laminating machine

The discontinuous line is used for the production of PU sheets. Different from the continuous line, the discontinuous line uses a single-block production mode. Although the production capacity is not as good as the continuous line, the discontinuous line is relatively flexible. It is suitable for small batch orders and some orders with large width and small quantity. It is also suitable for matching with the continuous line in cold storage production to cover various order requirements. Type 2 continuous line produces 2 plates at a time, and simultaneously loads and unloads the other two plates during pressure keeping, which improves efficiency.