Language
This model is specially designed for the floor bearing plate, the closed joint can provide better bearing capacity, under the same conditions, compared with other floor bearing plate, the effective width of the closed floor bearing plate is larger, and the resistance is stronger. Because the plate is covered by concrete, it has the function of fire and heat insulation. It has the advantages of fast installation speed and long service life.
1. Manual uncoiler, no power (3T) 2. Feed guide
1. Manual uncoiler, no power (5T) 2. Feed guide
1. Main motor power: 7.5kW 2. Hydraulic motor power: 2.2kW 3. Number of molding lanes: 18 4. Uncoiling: 600mm 5. Thickness: 0.4-0.6mm 6. Tool material: Cr12
1) Machine dimensions (length × width):12000x800 2) Line speed: 12 m/min 3) Uncoiler: 5T 4) Number of molding lanes: 28 5) roll material using high quality alloy 45 steel 6) coil thickness: 0.4 mm-0.8mm 7) Motor power: 7.5kW
Features of CZ section steel of WEIHUA Machinery Company: 1) Servo main drive 2) Quick exchange of C and Z, the conversion time is 10 minutes, when the width changes, the feeding frame can change at the same time 3) The width and height of the section can be steplessly adjustable 4) The cutting structure after punching is adopted, 5) The waist height on both sides is controlled by servo motors, and the width is directly set on the program, the operation is very convenient 6) The profile width servo motor is controlled, and the width is directly set on the program. The operation is very convenient. WEIHUA Company adopts the perfect combination structure of servo motor main drive and four guide pillar type side punching. These two structures are not available in the market at present. Such combination avoids all the above problems and makes CZ assembly more perfect, high speed, high precision, and is the machine with the highest cost-effective competitive advantage, (Up to 30 meters per minute without punching) High precision, within plus or minus 1mm.
Description By changing the blade, one machine can produce four C- shaped purlins. Features: 1) The machine base is processed by the gantry machining center, and the screw positioning pin is connected to the machine base. Sheet metal forming straight, high precision. 2) Hydraulic cutting is adopted to ensure the accurate geometric contour of the forming plate. This cutting method does not produce waste. 3) The length is measured by computer. Oval holes shall be punched on both sides of C purlin with adjustable hole spacing. The support hole is punched in the middle of the purlin.
Description This machine adopts PLC automatic control, full hydraulic transmission, driving hydraulic cylinder to transport and shear to the hole through the central pumping station, and hydraulic motor as the main drive. It is characterized by hydraulic stability, high precision, high output, low energy consumption, and regular cut section geometry. Hydraulic drive, two sets of correction with, globe valve with national patent.
Telephone:0510-83207527
E-mail:manager@wxweihua.com.cn
Fax: 86-510-83207527
Copyright©2024 WUXI WEI HUA MACHINERY CO., LTD