metal curtain wall plateConstruction scheme:

(1) The metal curtain wall plate is generally installed on site after being processed once in the processing plant.

(2) The position, specifications and fastener varieties, specifications and spacing meet the design requirements of the metal plate fasteners fixed on the skeleton.

(3) The connection between the metal curtain wall panel and the skeleton includes steel needles, through grooves, short grooves, white bolts, white hooks, etc. Among them, the steel needle connection is weak, and the specification is limited to curtain walls applicable to non-seismic design or 6-degree or 7-degree seismic design. The height of curtain wall shall not exceed 20 meters, and the area of single stone slab shall not exceed 1.0 square meters (the area of single metal curtain wall of other connection methods shall not exceed 1.5 square meters).

(4) To install the short groove metal curtain wall, first install a layer of metal according to the baseline of the curtain wall surface, and then install it layer by layer in turn, and add adhesive in the groove to ensure the stable connection between the slate and the pendant.

(5) The corners of the metal need to be assembled with stainless steel support or aluminum alloy steel.

(6) After the metal is cut or slotted, the debris should be cleaned with water. Epoxy resin type metal special structural adhesive should be applied between the metal and stainless steel or aluminum alloy pendant, and unsaturated polyester adhesive should not be used.

(7) The thickness of the stainless steel pendant cannot be less than 3.0mm, and the thickness of the aluminum alloy pendant cannot be less than 4.0mm.

(8) Adjust the vertical deviation when installed on each floor level.

(9) When installing metal curtain wall panels and slate gaps, waterproof measures should be taken and drainage outlets should be provided.

(10) The installation of metal curtain wall panels should be consistent with the direction of the arrow indicated by the product.

(11) The upper surface of the metal curtain wall plate should use neutral silicon weather-resistant sealant.

(12) The water drop line and water slope direction of the metal curtain wall plate should be accurate and straight.

(13) When using metal curtain wall panels to install aluminum alloy materials as pendants, the gasket should be separated when contacting steel to prevent bimetal corrosion.

the advantages of metal curtain wall plate:

(1) The surface of the metal curtain wall panel is green paint, odorless, no armor and other harmful substances, which creates a healthy and comfortable environment for the computer room. The construction is simple, the maintenance is convenient, and the practicability is particularly strong. The dots also ensure a long life of the metal curtain wall.

(2) The fire prevention effect of the board is quite good. After inspection and testing, the national-level fire prevention, circulating forest room wall panel antistatic performance, anti-static wall surface resistance value of 10 5~8 power ohms, charge attenuation

It takes no more than one second to ensure the anti-static performance of the anti-static wall panel and provide users with a safe and reliable barrier.

(3) Green installation, no welding, easy folding, reusable, can greatly save decoration time, metal titanium wall panels also have great advantages, that is, they have strong thermal insulation performance. We use and use the same indoors.

The air is insulated between the wall and the metal wallboard. The stone used on the bottom plate has a certain heat absorption capacity, and the heat preservation effect is very good.

(4) As a high-quality decorative material, it is simple, beautiful, generous, non-fading, dust-free, easy to clean, combined with the floor and ceiling to create a more comfortable and beautiful environment.